User Manual Q&AAnswer
Jan 12, 2025 - 09:53 PM
To connect the LEICKE EP18105 Outdoor Bluetooth Speaker DJ Roxxx Active to your device via Bluetooth, follow these steps:
1. Switch on the speaker by pressing and holding the power button for 3 seconds. You will hear an acoustic feedback indicating that the device is on.
2. After switching on, the speaker will be in Bluetooth mode. If it has been previously connected to a phone, the connection will be automatically established. Otherwise, the speaker will enter pairing mode.
3. Open the settings menu on your device and activate the Bluetooth option. In the list of found devices, you should see "Bamboo BT008". Connect to it. If prompted for a code, enter "0000".
4. If your phone is NFC-enabled and both NFC and Bluetooth are activated, you can connect by holding your phone close to the connector side of the speaker.
5. Once the connection is successfully established, the speaker will respond acoustically by saying "Paired".
6. The speaker is now ready to use. The pairing will be saved, and the next time you switch on the device, it will automatically connect to your device via Bluetooth.
Please note that these instructions are based on the information provided in the LEICKE EP18105 Outdoor Bluetooth Speaker DJ Roxxx Active user guide. For further assistance, you can refer to the manual or contact LEICKE customer support at info@leicke.com.
Add New Comment