User Manual Q&AAnswer
Jan 12, 2025 - 09:20 PM
To connect the PYLE PDWM2958B Compact UHF Wireless Microphone System to your computer for recording, you will need to follow these steps:
1. Physically connect the microphone receiver to your computer using the USB cable provided with the system. Plug one end of the USB cable into the USB port on the receiver base and the other end into an available USB port on your computer.
2. Make sure that the microphone receiver is turned on by using the on/off switch located on the front of the device.
3. On your computer, go to the audio settings. This can usually be found in the control panel or system preferences, depending on your operating system.
4. In the audio settings, select the PYLE PDWM2958B Compact UHF Wireless Microphone System as the audio input device. This will allow your computer to recognize the microphone system as the default audio recording device.
5. Once you have selected the microphone system as the input device, you can start recording audio using any software or application that supports audio recording on your computer.
Please refer to the user guide for more detailed instructions on connecting and using the PYLE PDWM2958B Compact UHF Wireless Microphone System with your computer.
Add New Comment