User Manual Q&AAnswer
Jan 12, 2025 - 08:17 PM
To connect the Polk True Surround III Wireless Surround Sound System to your TV, follow these steps:
1. Connect the HDMI cable provided to the "ARC"-labeled HDMI jacks on both the TV and the sound bar. This will allow for audio playback from the TV to the sound bar.
2. Alternatively, you can use the provided Optical cable to connect the TV and the sound bar. This is another option for audio playback.
3. Place the sound bar directly beneath your TV in the center for the best listening experience.
4. Connect the sound bar to an electrical outlet. During initialization, you will see a flickering orange light on the front of the sound bar.
5. Place the wireless subwoofer on the same wall as the TV, and make sure it is no more than 30 feet (10 meters) away from the sound bar for optimal results.
6. Connect the subwoofer to an AC outlet. The rear of the subwoofer will display a solid green light to indicate that it is connected to the sound bar.
7. Position the wireless surround speakers equally spaced out from the primary listening location, on the left and right sides. Ensure that the "L" speaker is on the left and the "R" speaker is on the right.
8. Connect the surround speakers to an AC outlet. The rear of the surround speakers will have a flashing green light.
9. Turn on your TV and check if you can see video and hear sound from the sound bar. If you can't hear any sound or see any lights on the front of the sound bar, press the power button on the sound bar to turn it on.
By following these steps, you should be able to successfully connect the Polk True Surround III Wireless Surround Sound System to your TV and enjoy immersive audio and deep bass. For more detailed instructions, please refer to the user manual provided with the product.
Add New Comment