How do I connect the Klipsch R-26FA 5.1 Home Theater Pack to my receiver? (Klipsch R-26FA 5.1 Bluetooth Home Theater User Guide)

Answer

manuals.plus

Jan 11, 2025 - 05:52 AM

To connect the Klipsch R-26FA 5.1 Home Theater Pack to your receiver, follow these steps:

1. Gather the necessary speaker wire: You will need 16-12 gauge speaker wire to connect the speakers to your receiver.

2. Identify the speaker terminals: Each speaker in the pack has two sets of binding posts for connection. The top set is for regular connection, while the bottom set is for the Atmos channel.

3. Connect the front left and right speakers: Take the speaker wire and connect the RED "positive" (+) terminal of the LEFT speaker to the RED "positive" (+) terminal of your receiver's LEFT channel. Connect the BLACK "negative" (-) terminal of the LEFT speaker to the BLACK "negative" (-) terminal of your receiver's LEFT channel. Repeat this procedure for the front right speaker, connecting it to the corresponding terminals on your receiver.

4. Connect the center channel speaker: Connect the center channel speaker in the same manner as the front speakers, using the appropriate terminals on your receiver.

5. Connect the rear surround channel speakers: The Klipsch WDST surround speakers should be placed approximately 2 feet above the listening position. Connect them to the corresponding terminals on your receiver, either on the walls directly adjacent to the listening position or on the wall behind the listening position.

6. Ensure proper wire placement: Make sure that no bare wires from any of the connections touch any other terminals, as this could cause a short and damage your equipment.

7. Verify amplifier compatibility: Klipsch speakers are highly efficient and compatible with a wide variety of amplifiers. However, it is important to check your amplifier's manual or consult with your dealer to ensure it is best suited for your application.

By following these steps, you should be able to successfully connect the Klipsch R-26FA 5.1 Home Theater Pack to your receiver. For more detailed information and diagrams, please refer to the user manual provided with the product.