User Manual Q&AAnswer
Jan 11, 2025 - 05:42 AM
To connect the Rockville RWM71U Dual UHF Handheld Wireless Microphone to your audio system, follow these steps:
1. Start by connecting the receiver to your audio system. Use the included 1/4" to 1/4" audio cable or an XLR cable to connect the audio output jack on the receiver to the corresponding input on your audio system.
2. Make sure the receiver is powered on and set to the same channel as the microphone you want to use. The channel selection can be adjusted on the receiver.
3. Next, turn on the microphone by pressing the power button. The microphone and receiver should automatically pair and establish a connection.
4. Adjust the volume settings on both the microphone and the audio system to achieve the desired sound level.
5. Test the microphone by speaking or singing into it. The audio should be transmitted wirelessly to the receiver and outputted through your audio system.
Note: Make sure to place the receiver within the specified operating range of 300´ – 400´ (indoor) or 250´ – 350´ (outdoor) for optimal performance.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with the Rockville RWM71U Dual UHF Handheld Wireless Microphone.
Add New Comment