User Manual Q&AAnswer
Jan 11, 2025 - 05:41 AM
To descale the Peach Street PE-1300 Speed-Boil Electric Kettle and remove any mineral deposits or build-up, follow these steps:
1. Prepare a descaling solution: Mix equal parts of white vinegar and water in a ratio of 1:1. You can also use a commercial descaling solution if preferred.
2. Pour the descaling solution into the kettle: Fill the kettle with the descaling solution, ensuring that it covers the affected areas.
3. Let it soak: Allow the descaling solution to sit in the kettle for about an hour. This will help dissolve the mineral deposits.
4. Scrub the interior: Use a non-abrasive brush or sponge to scrub the interior of the kettle, paying extra attention to the areas with build-up. Gently scrub in circular motions to remove the deposits.
5. Rinse thoroughly: Empty the descaling solution from the kettle and rinse it thoroughly with clean water. Repeat this step a few times to ensure all traces of the descaling solution are removed.
6. Boil clean water: Fill the kettle with clean water and bring it to a boil. Discard the boiled water and repeat this step once or twice to ensure any remaining residue is removed.
7. Wipe the exterior: Use a damp cloth to wipe the exterior of the kettle, removing any dirt or stains.
8. Dry and store: After cleaning, allow the kettle to air dry completely. Once dry, store it in a dry place until the next use.
Regular descaling of the Peach Street PE-1300 Speed-Boil Electric Kettle will help maintain its performance and prolong its lifespan.
Add New Comment