How do I pair the handheld transmitter with the receiver in the ATW-1312/L Handheld Lavalier Microphone system? (audio-technica ATW-1312/L Lavalier Microphone User Manual)

Answer

manuals.plus

Jan 11, 2025 - 05:24 AM

To pair the handheld transmitter with the receiver in the Audio-Technica ATW-1312/L Handheld Lavalier Microphone system, follow these steps:

1. Turn on the receiver and the handheld transmitter.
2. Press the System ID button on the receiver chassis that corresponds to the receiver you want to pair. The System ID number will start blinking on the display.
3. Within 15 seconds, press and hold the Pair button on the receiver chassis for about one second. The Pairing Indicator on the receiver will start blinking green, indicating that it is in Pair Mode.
4. Open the handheld transmitter and press and hold its Pair button within 30 seconds of entering Pair Mode on the receiver. The transmitter display will show the System ID number you have chosen on the receiver.
5. The Pairing Indicator on the receiver will glow steadily green, indicating that the handheld transmitter has been successfully paired with the receiver.
6. If you want to pair additional transmitters, make sure to turn off the previously paired transmitters before pairing a new one. Follow steps 2-4 for each additional transmitter, assigning a unique System ID number to each transmitter.

Note: The System ID number is a shared number assigned to a paired receiver and transmitter for identification purposes. It is not related to the transmitting frequency. The actual transmitting frequencies may change during power-up or performance due to the automatic frequency selection feature of the System 10 PRO wireless system.

For more detailed instructions and information, please refer to the user manual provided with the Audio-Technica ATW-1312/L Handheld Lavalier Microphone system.