User Manual Q&AAnswer
Jan 11, 2025 - 05:18 AM
To pair the transmitter with the receiver in the Audio-Technica ATW1311 wireless microphone system, follow these steps:
1. Turn on the receiver and the transmitter.
2. Press the System ID button on the receiver chassis that corresponds to the receiver you want to pair. The System ID number will start blinking on the display.
3. Continue pressing the System ID button until the display shows the desired number from 0 to 9.
4. Within 15 seconds, press and hold the Pair button on the receiver chassis for about one second. The Pairing Indicator on the receiver will start blinking green, indicating that the receiver is in Pair Mode.
5. Open the transmitter and press and hold its Pair button within 30 seconds of entering Pair Mode. The transmitter display will show the System ID number you chose on the receiver.
6. The Pairing Indicator on the receiver will glow steadily green, indicating that the transmitter and receiver have been successfully paired.
Note: If you want to pair additional transmitters, make sure to switch off the already paired transmitters before adding a new one. Each transmitter should have a unique System ID number assigned to it.
Please refer to the user manual for more detailed information and illustrations on pairing the transmitter with the receiver in the Audio-Technica ATW1311 wireless microphone system.
Add New Comment