User Manual Q&AAnswer
Jan 11, 2025 - 05:13 AM
To pair the receiver with the transmitter in the Audio-Technica ATW-1301 Wireless Microphones and Transmitters, follow these steps:
1. Turn on the receiver chassis and the transmitter.
2. Press the System ID button on the chassis that corresponds to the receiver you want to pair. The ID number will start blinking on the display.
3. Continue pressing the System ID button until the display shows the desired number from 0 to 9.
4. Within 15 seconds, press and hold the Pair button on the receiver chassis for about one second. The receiver's Pairing Indicator will start blinking green, indicating it is in Pair Mode.
5. Open the transmitter and press and hold its Pair button within 30 seconds of entering Pair Mode. The transmitter display will show the System ID number you chose on the receiver.
6. The receiver's Pairing Indicator will glow steadily green, indicating that the pairing process was successful.
Note: If you want to pair an additional transmitter, make sure to turn off the first transmitter before pairing the second one. Each transmitter should have a unique System ID number.
Please refer to the user manual for more detailed instructions and illustrations.
Add New Comment