User Manual Q&AAnswer
Jan 11, 2025 - 05:11 AM
To pair the transmitter with the receiver in the Audio Technica ATW1322 wireless microphone system, follow these steps:
1. Turn on the receiver chassis and the transmitter.
2. Press the System ID button on the receiver chassis that corresponds to the receiver you want to pair. The ID number will start blinking on the display.
3. Continue pressing the System ID button until the desired number (from 0 to 9) is displayed.
4. Within 15 seconds, press and hold the Pair button on the receiver chassis for about one second. The Pairing Indicator on the receiver will start blinking green, indicating that it is in Pair Mode.
5. Open the transmitter and press and hold its Pair button within 30 seconds of entering Pair Mode. The transmitter display will show the System ID number you chose on the receiver. The Pairing Indicator on the receiver will glow steadily green, indicating successful pairing.
Note: If you want to pair an additional transmitter, make sure to switch off the first transmitter by pressing and holding its Power/Mute button. Then turn on the second transmitter and follow the steps above, assigning a different System ID number to the new transmitter.
For more detailed instructions and illustrations, refer to the "Pairing Receivers with Transmitters" section in the user manual provided.
Add New Comment