User Manual Q&AAnswer
Jan 11, 2025 - 05:03 AM
To adjust the heat settings on the Kismile PTC-902A Small Electric Space Heater, please follow these steps:
1. Make sure the heater is plugged into a functioning 120V outlet.
2. Locate the control panel on the heater or use the included remote control.
3. On the control panel, you will find buttons or a dial for adjusting the heat settings.
4. If there are buttons, look for the ones labeled "Heat" or "Heat Settings." Press the "+" or "-" buttons to increase or decrease the heat output.
5. If there is a dial, turn it clockwise to increase the heat or counterclockwise to decrease it. The dial may have temperature markings or numerical values to indicate the level of heat.
6. Use the remote control by pointing it towards the heater's receiver and pressing the appropriate buttons to increase or decrease the heat settings.
7. The Kismile PTC-902A heater typically offers two heat settings: 750W and 1500W. Choose the setting that suits your comfort level and energy-saving needs.
8. Once you have adjusted the heat settings, the heater will start producing the desired level of warmth.
Please refer to the user manual for specific instructions and illustrations related to your model of the Kismile PTC-902A Small Electric Space Heater.
Add New Comment