User Manual Q&AAnswer
Jan 11, 2025 - 05:02 AM
To connect your speakers to the PYLE PMXAKB-1000 Portable Wireless Bluetooth Amplifier System, follow these steps:
1. Locate the speaker binding posts on the rear panel of the amplifier. These are labeled as "MDP" and are used for connecting the speakers.
2. If your speakers have MDP (banana plug) connectors, simply insert the plugs into the corresponding speaker binding posts. Make sure to match the polarities correctly (+ and -).
3. If your speakers have standard speaker wire connections, unscrew the plastic color-coded binds on the speaker binding posts until you can access the wire holes on the inner sides of the binds. Insert the speaker wires into the holes and tighten the binds to secure the wires in place. Make sure to match the polarities correctly (+ and -).
4. Repeat the above steps for each speaker, ensuring that each speaker is connected to the appropriate speaker binding posts on the amplifier.
5. Once all the speakers are connected, double-check the connections to ensure they are secure.
Note: It is important to use speakers that are rated no lower than 4 ohms with the amplifier to avoid overloading the amplifier.
For more detailed instructions and illustrations, please refer to the "Getting Connected" section of the owner's manual for the PYLE PMXAKB-1000 Portable Wireless Bluetooth Amplifier System.
Add New Comment