User Manual Q&AAnswer
Jan 11, 2025 - 04:56 AM
To connect your Epson 77C PowerLite Business Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the computer video cable (VGA cable) that came with your projector.
3. Connect one end of the VGA cable to the computer's video output port.
4. Connect the other end of the VGA cable to the Computer 1 or Computer 2 input port on the projector.
5. Turn on your computer.
6. Turn on the projector by pressing the Power button on the remote control or the projector itself.
7. Wait for the projector to warm up and display the startup screen.
8. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system.
9. Adjust the focus and zoom of the projector, if necessary, using the focus and zoom rings on the projector lens.
10. Your computer's display should now be projected onto the screen or surface connected to the projector.
For more detailed instructions and troubleshooting tips, please refer to the Epson 77C PowerLite Business Projector User Manual.
Add New Comment