User Manual Q&AAnswer
Jan 11, 2025 - 04:55 AM
To connect your Acer X1161P 3D-DLP Projector to your computer, follow these steps:
1. Make sure your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to detect the projector. This may be labeled as "Detect" or "Identify."
8. Once the projector is detected, you can choose to extend or duplicate your computer's display onto the projector. Select the desired option.
9. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user guide of the Acer X1161P 3D-DLP Projector. You can access the user guide by clicking on the following link: [Acer X1161P 3D-DLP Projector User Guide](https://manuals.plus/wp-content/uploa...)
Add New Comment