User Manual Q&AAnswer
Jan 11, 2025 - 04:51 AM
To connect your Mitsubishi XD500U DLP Projector to your computer, follow these steps:
1. Ensure that both your projector and computer are turned off.
2. Locate the VGA or HDMI port on your computer. The VGA port is typically blue, while the HDMI port is rectangular and labeled "HDMI."
3. Connect one end of the VGA or HDMI cable to the corresponding port on your computer.
4. Locate the VGA or HDMI input port on the projector. It is usually labeled "Computer In" or "HDMI In."
5. Connect the other end of the VGA or HDMI cable to the input port on the projector.
6. Turn on your computer and the projector.
7. Use the projector's remote control to select the appropriate input source. Press the "Input" or "Source" button on the remote until the computer input is selected.
8. Your computer's display should now be projected onto the screen or surface connected to the projector.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the Mitsubishi XD500U DLP Projector.
Add New Comment