User Manual Q&AAnswer
Jan 11, 2025 - 04:38 AM
To connect your NEC M300X Portable Projector to your computer, follow these steps:
1. Make sure your computer and projector are both turned off.
2. Locate the appropriate video cable for your computer and projector. The M300X projector supports various video input options, including VGA, HDMI, and composite video.
3. Connect one end of the video cable to the video output port on your computer. If you are using a VGA cable, make sure to tighten the screws on both ends for a secure connection.
4. Connect the other end of the video cable to the corresponding video input port on the projector. The available video input ports are located on the back or side panel of the projector.
5. Turn on your computer and then turn on the projector.
6. Use the projector's remote control or the control panel buttons to select the appropriate input source. Press the "Input" or "Source" button until the projector displays the connected computer's video signal.
7. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, refer to the user manual provided with your NEC M300X Portable Projector.
Add New Comment