User Manual Q&AAnswer
Jan 11, 2025 - 04:10 AM
To connect your EPSON Powerlite 1980WU projector to your computer, please follow these steps:
1. Ensure that your computer and projector are both turned off.
2. Locate the computer video cable that came with your projector. This cable is typically blue and has a connector on each end.
3. Connect one end of the computer video cable to the computer's video output port. The video output port is usually located on the back or side of the computer and may be labeled as "VGA," "DVI," or "HDMI."
4. Connect the other end of the computer video cable to the projector's computer video input port. The computer video input port on the projector is usually labeled as "Computer," "RGB," or "VGA."
5. Once the cable is securely connected, turn on your computer and your projector.
6. Use the projector's remote control or control panel to select the appropriate input source. Press the "Source Search" or "Input" button until the computer input source is displayed on the screen.
7. Your computer's display should now be projected onto the screen or surface connected to the EPSON Powerlite 1980WU projector.
For more detailed instructions and troubleshooting tips, please refer to the EPSON Powerlite 1980WU Projector User's Guide.
Add New Comment