User Manual Q&AAnswer
Jan 11, 2025 - 03:34 AM
To adjust the temperature on the F.EASY.D SY-210111 Small Space Heater, follow these steps:
1. Make sure the heater is plugged into a power outlet with a voltage of 120V.
2. Turn on the back power switch to energize the heater and enter the standby state.
3. Press the top gear switch once to enter the first gear natural wind mode. In this mode, the heater will not produce heat, and the corresponding blue indicator light will be on.
4. Press the top gear switch again to enter the medium temperature hot air mode. In this mode, the heater will produce medium temperature constant temperature hot air. The average heating power is 500W, and the corresponding red indicator light will be on.
5. Press the top gear switch for the third time to enter the high-grade hot air mode. This mode provides the maximum heating power, and the corresponding red indicator light will be on.
6. Press the gear switch again to enter the heat dissipation mode. In this mode, the heater will blow out natural wind without heating. The high-temperature indicator will flash, and the heater will automatically turn off when the heating coil temperature drops below 60 degrees or after 10 seconds of maximum heat dissipation.
7. To turn off the heater, simply turn off the back power switch.
Please refer to the user manual for more detailed instructions and safety precautions.
Add New Comment