User Manual Q&AAnswer
Jan 11, 2025 - 03:28 AM
To clean the Dreo CR1-0225-70 Air Circulator Fan, follow these steps:
1. Outer Surface: Gently wipe off the dust with a soft, dry cloth. Avoid using any chemical agents when cleaning the fan.
2. Front Grille and Blades: Turn off and unplug the appliance before cleaning. Remove the xxxx on the front grille and rotate the grille counterclockwise to take it off. Remove the blade cap by rotating it as shown and take the blade assembly out of the shaft. Rinse the cap, blades, and grille under running water or with a clean, damp cloth. Dry up all parts and insert the blade assembly back into the shaft by aligning the D-shaped points on the center. Align the point on the front grille with the right point on the casing, then rotate the grille clockwise and install the xxxx back in place.
Note: Always unplug the air circulator before any cleaning or maintenance to avoid the risk of fire, electric shock, or injury to persons. Do not immerse the fan in water or get water inside the motor housing.
For more information and visual instructions, refer to the "CLEANING AND MAINTENANCE" section in the Dreo CR1-0225-70 Air Circulator Fan USER MANUAL.
Add New Comment