User Manual Q&AAnswer
Jan 11, 2025 - 03:26 AM
To synchronize the , follow these steps:
1. Turn on the SR212 receiver and the VH212 transmitters.
2. Press the CH A SELECT button on the front of the SR212 to choose an available channel for the CH A receiver. The channel number will increase by one digit, from 1–9 then A–C. Once the last channel has been reached, the count will cycle back to 1.
3. Position the VH212 transmitter about 6-12" (15-30 cm) from the front of the SR212 receiver with the transmitter's IR window facing the IR transmitter on the front panel of the SR212 receiver.
4. Press and hold the SR212 CH A SELECT button to set the transmitter to the same channel as the receiver via infrared transmission.
5. When the transmission is complete, the SR212 will receive the RF signal and the tone key from the transmitter. The CH A READY indicator will light on the front panel of the SR212 receiver.
6. Repeat these steps for the CH B transmitter and receiver. CH A and CH B available frequency channels do not overlap, so you can set the two receivers to the same channel number or letter.
Note: It is important to ensure that the transmitters and receiver are in line of sight with each other during the synchronization process.
Add New Comment