User Manual Q&AAnswer
Jan 11, 2025 - 03:04 AM
To adjust the temperature on the COWSAR U630182 Oil Filled Radiator Heater, follow these steps:
1. Make sure the heater is plugged into a standard electrical outlet and turned on.
2. Locate the thermostat control on the heater. It is usually a dial or a switch with temperature markings.
3. Turn the thermostat control clockwise or counterclockwise to adjust the temperature. The markings on the control will indicate the temperature range.
4. Set the control to your desired temperature. As you turn the control, you will notice the heater adjusting its heat output accordingly.
5. Wait for the heater to reach the set temperature. The heater will automatically cycle on and off to maintain the desired temperature.
Note: It may take some time for the heater to reach the set temperature, especially if the room is very cold. Keep in mind that the thermostat control adjusts the heater's output, so turning it higher will make the heater produce more heat, while turning it lower will reduce the heat output.
For more detailed instructions and information, please refer to the user manual provided with the COWSAR U630182 Oil Filled Radiator Heater.
Add New Comment