User Manual Q&AAnswer
Jan 11, 2025 - 02:55 AM
To connect your ViewSonic PJD5132 SVGA DLP Projector to your computer, follow these steps:
1. Make sure both the projector and your computer are turned off.
2. Locate the VGA or HDMI port on the back of the projector.
3. Connect one end of the VGA or HDMI cable to the corresponding port on the projector.
4. Locate the VGA or HDMI port on your computer. If your computer only has a VGA port, you will need a VGA cable. If it has an HDMI port, you can use an HDMI cable.
5. Connect the other end of the VGA or HDMI cable to the corresponding port on your computer.
6. Turn on your computer and wait for it to fully boot up.
7. Turn on the projector by pressing the power button.
8. Use the projector's remote control or the control buttons on the projector to select the correct input source. If you connected using VGA, select the VGA input. If you connected using HDMI, select the HDMI input.
9. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with your ViewSonic PJD5132 SVGA DLP Projector.
Add New Comment