User Manual Q&AAnswer
Jan 11, 2025 - 02:54 AM
To connect your ViewSonic PJD5232L XGA DLP Projector to your computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the VGA or HDMI port on your computer and the corresponding port on the projector.
3. Connect one end of the VGA or HDMI cable to the VGA or HDMI port on your computer.
4. Connect the other end of the cable to the VGA or HDMI port on the projector.
5. Turn on your computer and projector.
6. On your computer, go to the display settings and select the appropriate display mode for the projector (e.g., duplicate, extend, or projector only).
7. Adjust the focus and zoom on the projector to achieve the desired image size and clarity.
For more detailed instructions and troubleshooting tips, please refer to the user guide provided with the ViewSonic PJD5232L XGA DLP Projector. You can access the user guide by clicking on the link provided in the question or by visiting the ViewSonic website.
Add New Comment