Answer
![manuals.plus](https://data3.answerbase.com/answerbase/15673/UserFiles/User3627018/profileImage3627018.jpg?638365818380000000)
Jan 11, 2025 - 02:51 AM
To set up the Music Hall MMF-2.3 turntable, follow these steps:
1. Clear a level and suitable workspace to assemble the turntable.
2. Remove the turntable and all parts from the carton.
3. Install the drive belt for 33⅓ rpm play by looping it around the smaller diameter rim of the stepped motor pulley. For 45 rpm play, use the large diameter rim of the motor pulley.
4. Center the platter over the spindle of the sub-platter and lower it until it rests securely on the sub-platter.
5. Place the counterweight onto the tonearm by screwing it counterclockwise onto the back of the tonearm.
6. Remove the tonearm-locking strap and the stylus guard from the cartridge.
7. Balance the tonearm by lifting it and positioning it between the tonearm rest and the platter. Turn the counterweight counterclockwise or clockwise until the tonearm floats freely in mid-air and parallel to the platter.
8. Set the tracking force by turning the counterweight counterclockwise until the tracking force scale turns to number 20 on the scale, which is equivalent to 2.0 grams.
9. Attach the anti-skating weight to the anti-skating rod and hanger.
10. Slide the dust cover onto the dust cover hinges on the back of the plinth.
11. Connect the turntable to the power supply and audio system using the provided cables.
12. Place a record on the platter, turn on the power switch, and lower the tonearm onto the record to start playing.
For more detailed instructions and illustrations, refer to the Music Hall MMF-2.3 Turntable Instruction Manual.
Add New Comment![Sending...](https://manuals.answerbase.com/images/loading-boxes.gif)