User Manual Q&AAnswer
Jan 11, 2025 - 02:42 AM
To adjust the position of the projector and get an undistorted image, follow these steps:
1. Place the projector on a sturdy, flat, and level surface, facing the wall or projection screen.
2. Determine the distance between the projector and the wall (W1) based on the desired image size. Refer to the Quick Installation Guide in the user manual for recommended distances for different image sizes.
3. Adjust the height of the projector by using the height adjusting wheels on the side of the projector. This will help align the image properly.
4. Connect the projector to a power source and turn it on.
5. Follow the on-screen instructions or the wizard in the user manual to adjust the projection area, select the language, pair the remote control, and configure network settings.
6. Use the electric focus feature to adjust the focus of the image. Press the Left/Right buttons on the remote control to achieve the clearest projection.
7. Make sure there are no obstacles blocking the projector's lens or the Parisrhone icon on the front of the projector.
8. Ensure that the projector is parallel to the wall or projection screen for a straight and undistorted image.
9. If needed, use the keystone correction feature in the projector's settings to adjust the image and correct any distortion caused by the projector's angle.
10. Once the position and settings are adjusted, you should have an undistorted image on the wall or projection screen.
For more detailed instructions and illustrations, refer to the user manual provided with the projector.
Add New Comment