How do I connect my device to the ViewSonic LS810 Short Throw Laser Projector? (ViewSonic LS810 Short Throw Laser Projector User Guide)

Answer

manuals.plus

Jan 11, 2025 - 02:17 AM

To connect your device to the ViewSonic LS810 Short Throw Laser Projector, follow these steps:

1. Check the available ports on the projector. The LS810 Short Throw Laser Projector has various input ports, including HDMI, VGA, Composite, and USB Type A/B.

2. Determine the type of connection you want to use. The LS810 Short Throw Laser Projector supports both wired and wireless connections.

3. Wired Connection:
a. For HDMI connection, use an HDMI cable to connect the HDMI output port of your device to the HDMI input port of the projector.
b. For VGA connection, use a VGA cable to connect the VGA output port of your device to the VGA input port of the projector.
c. For Composite connection, use a composite cable (RCA) to connect the composite output port of your device to the composite input port of the projector.
d. For USB connection, use a USB cable to connect the USB Type A/B ports of your device and the projector.

4. Wireless Connection:
a. Ensure that both your device and the projector are connected to the same Wi-Fi network.
b. On the LS810 Short Throw Laser Projector, go to the "Network" menu and select "Wireless Display."
c. On your device, enable wireless display or screen mirroring. The exact steps may vary depending on your device's operating system.
d. Select the ViewSonic LS810 Short Throw Laser Projector from the list of available devices.

5. Once the connection is established, you may need to adjust the input source on the projector. Press the "Input" button on the remote control or the projector's control panel to select the appropriate input source.

For more detailed instructions and troubleshooting tips, refer to the ViewSonic LS810 Short Throw Laser Projector User Guide provided in the link above.