User Manual Q&AAnswer
Jan 11, 2025 - 01:59 AM
To connect the receiver to your amplifier or mixer, follow these steps:
1. Locate the receiver base and identify the audio output jacks. The receiver base has both a balanced XLR output jack and a 1/4" audio output jack.
2. Depending on the input ports available on your amplifier or mixer, choose the appropriate audio output jack on the receiver base.
3. If your amplifier or mixer has an XLR input port, use an XLR cable to connect the XLR output jack on the receiver base to the XLR input port on your amplifier or mixer.
4. If your amplifier or mixer has a 1/4" input port, use a 1/4" audio cable to connect the 1/4" audio output jack on the receiver base to the 1/4" input port on your amplifier or mixer.
5. Ensure that the connections are secure and tight.
6. Power on the receiver and your amplifier or mixer.
7. Adjust the volume output of the receiver using the volume xxxx on the receiver base.
8. Test the microphone system by speaking or singing into the microphone. The audio should be transmitted from the microphone to the receiver and then to your amplifier or mixer for amplification and playback.
Note: Make sure to refer to the user manual of your specific amplifier or mixer for any additional setup or configuration requirements.
Add New Comment