User Manual Q&AAnswer
Jan 11, 2025 - 01:10 AM
To use the SYNCWIRE SW-XC535 iPhone Car Charger, follow these steps:
1. Insert the SYNCWIRE SW-XC535 into the car's cigarette lighter.
- Locate the cigarette lighter socket in your car.
- Insert the car charger firmly into the socket until it is securely in place.
2. Connect the Lightning cable to your Apple device for primary charging.
- Plug the Lightning connector of the built-in cable into the charging port of your Apple device (e.g., iPhone, iPad).
3. Utilize the extra USB port for simultaneous charging of other devices.
- If you have another device that requires charging, you can use the additional USB port on the car charger.
- Connect the USB cable of the other device to the USB port on the car charger.
4. Ensure a secure and stable connection to facilitate efficient charging.
- Make sure the car charger is securely plugged into the cigarette lighter socket.
- Ensure the Lightning cable or USB cable is securely connected to both the car charger and the device.
5. Monitor the white LED indicator to confirm charging readiness.
- The car charger has a white LED indicator that will light up when it is ready for charging.
- If the LED indicator is not lit, check the connection and make sure the car charger is receiving power.
Note: Before using the car charger internationally, verify compatibility with the power input of the country you are visiting.
For more detailed information and troubleshooting tips, please refer to the SYNCWIRE SW-XC535 iPhone Car Charger User Manual provided with the product.
Add New Comment