How do I connect my device to the ViewSonic PJD5134 SVGA DLP Projector? (ViewSonic PJD5134 SVGA DLP Projector User Guide)

Answer

manuals.plus

Jan 11, 2025 - 12:51 AM


To connect your device to the ViewSonic PJD5134 SVGA DLP Projector, follow these steps:

1. Check the available ports on both your device and the projector. The PJD5134 projector offers various input options, including VGA, HDMI, S-Video, and Composite Video.

2. Determine which cable you need to connect your device to the projector. For example, if your device has a VGA output, you will need a VGA cable. If your device has an HDMI output, you will need an HDMI cable.

3. Power off both your device and the projector before making any connections.

4. Connect one end of the cable to the appropriate port on your device and the other end to the corresponding port on the projector. Ensure that the connections are secure.

5. Power on your device and the projector.

6. On the projector's remote control, press the "Input" button to select the correct input source. Use the arrow keys to navigate and the "Enter" button to confirm.

7. If necessary, adjust the projector's settings to optimize the display. Refer to the user manual for detailed instructions on adjusting settings such as brightness, contrast, and aspect ratio.

8. Your device's screen should now be displayed on the projector. If not, double-check the connections and input source selection.

For more detailed instructions and troubleshooting tips, please refer to the ViewSonic PJD5134 SVGA DLP Projector User Guide provided in the link above.