User Manual Q&AAnswer
Jan 11, 2025 - 12:33 AM
To connect your InFocus LP640 projector to a computer, you can use the M1-DA computer input source. The M1-DA port is a multi-purpose port that supports both digital and analog signals. Here are the steps to connect your projector to a computer:
1. Make sure both the projector and the computer are turned off.
2. Locate the M1-DA port on the back of the projector. It is a rectangular port with multiple pins.
3. Connect one end of the M1-A computer cable (included with the projector) to the M1-DA port on the projector.
4. Connect the other end of the M1-A computer cable to the appropriate video output port on your computer. This may be a VGA, DVI, or HDMI port, depending on your computer's video output options.
5. Turn on the projector and the computer.
6. Use the projector's remote control or the control panel on the projector to select the M1-DA input source.
7. The projector should now display the computer's screen. If not, you may need to adjust the display settings on your computer to ensure it is sending the video signal to the projector.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the InFocus LP640 projector.
Add New Comment