User Manual Q&AAnswer
Jan 11, 2025 - 12:28 AM
Cleaning the VINCI E23010 Electric Coffee Maker is essential for maintaining its performance and ensuring the quality of your cold brew coffee. Here are the instructions for cleaning the different parts of the coffee maker:
1. Cleaning the Filter Basket:
- Remove the Control Lid and Filter Basket Assembly from the Cleaning Cup.
- Turn the Filter Basket counterclockwise to remove it from the Control Lid.
- Remove the Filter Basket Top Cap and dispose of the spent coffee grounds.
- Turn the Filter Basket Bottom Cap counterclockwise to aid in disposing of any remaining spent grounds.
- Rinse and wash all of the Filter Basket parts with warm soapy water, ensuring they are clean and ready for the next use.
2. Cleaning the Control Lid:
- NEVER submerge the Control Lid in water or any other liquid.
- Fill the Cleaning Cup about 2/3 full with clean, fresh water.
- Inspect the bottom of the Water Pickup Tube to see if any brewing material has been collected on the filter. If so, gently rinse ONLY the bottom of the Water Pickup Tube to clear any debris.
- Place the Control Lid onto the Cleaning Cup.
- Rotate the Control xxxx to CLEAN.
- Press the Brew button to start the cleaning process. The fresh water from the cleaning cup will run through the pump, flushing out any remnants from the prior brew cycle.
- After the Clean cycle is complete, raise the Control Lid until the Water Pickup Tube is no longer touching the water in the Cleaning Cup. Press the Brew button again so air runs through the pump system to evacuate any remaining water.
- Empty any remaining water in the Cleaning Cup and rinse it clean to be ready for the next use.
It is important to follow these cleaning instructions regularly to prevent any buildup or clogging that may affect the performance of your VINCI E23010 Electric Coffee Maker. For more detailed instructions and information, please refer to the instruction manual provided with your coffee maker.
Add New Comment