User Manual Q&AAnswer
Jan 10, 2025 - 11:41 PM
To change the output voltage and frequency of the converter, follow these steps:
1. Press and hold both the △ and ▽ selection buttons on the front panel of the converter for 3 seconds until the LCD display starts blinking.
2. To change the output frequency, when the frequency value is blinking, press either the △ or ▽ selection button for 1 second. The frequency setting will change every 2 seconds if you continue to press the button. Press both selection buttons at the same time to access the next setting customization option. To confirm the setting, leave the LCD display blinking without pressing any buttons for 30 seconds. The new frequency setting will take effect once the blinking stops.
3. To change the converter's rated voltage, when the voltage value is blinking, press either the △ or ▽ selection button for 1 second to change the rated voltage. Keep pressing the button until the required voltage is blinking. Then, press both selection buttons at the same time to confirm the setting, or leave the LCD blinking for 30 seconds to end. The new rated voltage setting will be applied.
Please refer to the operational guide for more detailed instructions and illustrations on how to change the output voltage and frequency of the Power X Changer 22050UX-1.5K Step-Up Voltage & Frequency Converter.
Add New Comment