User Manual Q&AAnswer
Jan 10, 2025 - 11:20 PM
To match the receiver and transmitter for the Pyle PDWM1980 Compact UHF Wireless Microphone System, please follow these steps:
1. Make sure the receiver is powered OFF.
2. On the transmitter side, press and hold the frequency-change button.
3. While holding the frequency-change button, press and hold the power button until the display starts flashing.
4. Turn ON the receiver and you will see the RF light flashing.
- Note: If the receiver has an LED display, turn ON the receiver and wait for 3-5 seconds.
5. Return to the transmitter side and re-press the frequency-change button.
6. The matching is successful if the RF light is ON or the LED display shows the frequency. If not, repeat steps 1 to 5.
By following these steps, you should be able to successfully match the receiver and transmitter for your Pyle PDWM1980 Compact UHF Wireless Microphone System.
Add New Comment