User Manual Q&AAnswer
Jan 10, 2025 - 11:07 PM
To connect a Bluetooth speaker to the Naxa Electronics NYP-2502C projector, follow these steps:
1. Turn on the projector by pressing the Power button.
2. Press the Menu button on the remote control to enter the menu screen.
3. Use the left/right directional arrows to select the right side menu.
4. Use the up/down directional arrows to select the Bluetooth column.
5. Press the "OK" button to enter the Bluetooth menu.
6. Use the left/right directional arrows to select "ON" to enable Bluetooth.
7. Turn on your external Bluetooth speaker and put it in pairing mode.
8. After a few seconds, an audio sound will notify you that the projector and speaker are connected.
9. The projector will now output sound through the external Bluetooth speaker.
Note: If the Bluetooth speaker doesn't connect automatically, you can try resetting the Bluetooth connection. Enter the Bluetooth setup menu and select "Reset BT." The Bluetooth device should then connect to the projector automatically.
For more detailed instructions and illustrations, please refer to the user guide provided with the Naxa Electronics NYP-2502C projector.
Add New Comment