User Manual Q&AAnswer
Jan 10, 2025 - 10:47 PM
To connect the Focal H5006 On-Ear Headphones to your device, please follow these steps:
1. Verify the physical audio output of your device: Check the audio ports on your computer or audio device and make sure they are not physically damaged.
2. Connect the headphone connector to the audio port: Plug the headphone connector into the audio output port of your device. The connector should fit securely into the port.
3. Set the sound output preferences on your device: Depending on your device, you may need to adjust the sound output settings. Go to the sound settings or audio preferences on your device and select the Focal H5006 headphones as the default audio output.
4. Make a mic check (if applicable): If your Focal H5006 headphones have a built-in microphone, you can test it by recording a voice memo or making a call to ensure the microphone is working properly.
Note: The specific steps may vary depending on your device and operating system. Please refer to the user manual of your device for more detailed instructions on connecting headphones.
For more information and troubleshooting tips, please refer to the user manual provided with the Focal H5006 On-Ear Headphones.
Add New Comment