User Manual Q&AAnswer
Jan 10, 2025 - 10:37 PM
To connect your Epson PowerLite 99W WXGA LCD Projector to a computer, follow these steps:
1. Ensure that your computer and projector are turned off.
2. Locate the computer video port on your computer. It is usually labeled as "RGB," "VGA," "D-Sub," or "HD-15." It is a 15-pin port typically found on the back of the computer.
3. Connect one end of the VGA cable (included with the projector) to the computer video port.
4. Locate the Computer/Component video port on the projector. It is labeled as "Computer 1" or "Computer 2" and is also a 15-pin port.
5. Connect the other end of the VGA cable to the Computer/Component video port on the projector.
6. Turn on your computer and then turn on the projector.
7. On your computer, go to the display settings. This can usually be accessed by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
8. In the display settings, select the appropriate resolution for the projector. The native resolution of the Epson PowerLite 99W WXGA LCD Projector is 1280 x 800 pixels.
9. Set the display mode to "Extended" or "Duplicate" depending on your preference.
10. If necessary, adjust the projector's focus and zoom settings to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the Epson PowerLite 99W WXGA LCD Projector User's Guide provided above.
Add New Comment