How do I set up the WBM SMART Ultra Short Throw 4K Projector? (WBM Smart Short Throw 4K Projector Operational Guide)

Answer

manuals.plus

Jan 10, 2025 - 10:25 PM


To set up the WBM SMART Ultra Short Throw 4K Projector, follow these steps:

1. Find a suitable location: Choose a wall or projection screen where you want to display the image. Ensure that the surface is flat and clean.

2. Connect the power cord: Plug one end of the power cord into the projector and the other end into a power outlet.

3. Connect the HDMI cable: Connect one end of the HDMI cable to the HDMI port on the projector and the other end to your video source, such as a laptop, Blu-ray player, or gaming console.

4. Turn on the projector: Press the power button on the projector or use the remote control to turn it on.

5. Adjust the image: Use the focus ring on the projector to adjust the sharpness of the image. You can also use the keystone correction feature to correct any distortion caused by the projector's angle.

6. Adjust the screen size: Move the projector closer or farther away from the wall or screen to adjust the image size. The projector's ultra-short throw capability allows for a large image even when placed close to the screen.

7. Adjust the audio: If you want to use the built-in speakers, make sure they are connected and adjust the volume using the remote control.

8. Enjoy your viewing experience: Use the remote control to navigate through menus, adjust settings, and control playback.

For more detailed instructions and troubleshooting tips, refer to the user manual included in the box.