User Manual Q&AAnswer
Jan 10, 2025 - 09:39 PM
To connect the Pyle PDWM3375 Professional Wireless Microphone to your sound system, follow these steps:
1. Connect the receiver to your sound system:
a. Plug the AC adapter into the DC power connector on the back of the receiver.
b. Plug the AC adapter into an AC 120V/220V 50Hz outlet.
c. Connect the audio cable from the audio output on the receiver to the input on your amplifier or mixer.
2. Install the batteries in the handheld microphones:
a. Push open the battery cover on each handheld microphone.
b. Insert two AA batteries into each microphone, observing the correct polarity (+/-).
c. Close the battery cover securely.
3. Match the wireless frequency between the receiver and the transmitters:
a. Press and hold the "SET" button on the receiver until the display starts flashing.
b. While the display is flashing, press the "SET" button again to select the desired channel. The selected channel will save automatically after 5 seconds.
c. Power on your microphone/transmitter and press and hold the "UP" and "DOWN" arrow keys until the channel number on the display starts flashing.
d. While the channel number is flashing, use the "UP" and "DOWN" arrow keys to select the same channel as chosen on the receiver. The selected channel will save automatically after 5 seconds.
e. Repeat these steps for additional microphones/transmitters if needed.
Once you have completed these steps, the Pyle PDWM3375 Professional Wireless Microphone should be connected to your sound system and ready to use. Refer to the user manual for more detailed instructions and troubleshooting tips.
Add New Comment