User Manual Q&AAnswer
Jan 10, 2025 - 09:32 PM
To adjust the keystone correction on the FunFlix RD-828E projector, follow these steps:
1. Use the remote control or the projector buttons to enter the setting interface.
2. Select the Projection image setting and press OK to enter.
3. For vertical keystone correction:
a. Select "Front" in the "Keystone Advance" column.
b. Use the direction buttons on the remote control or projector to adjust the vertical parameter (-50 to 0) until the desired picture is obtained.
c. If the picture is inverted, select "Rear" in the "Keystone Advance" column and adjust the vertical parameter (0 to 50) until the desired picture is obtained.
4. For four-point keystone correction (horizontal and vertical):
a. Select "Side" in the "Keystone Advance" column.
b. Press OK to enter the four-point adjustment display interface.
c. Use the direction buttons on the remote control or projector to adjust the projected image according to the on-screen instructions. Adjust each corner point until the image is rectangular.
d. Press the return key to save the adjustment and exit to the main menu interface.
By following these steps, you can easily adjust the keystone correction on the FunFlix RD-828E projector to ensure a properly aligned and rectangular image. For more detailed instructions, please refer to the user guide provided with the projector.
Add New Comment