User Manual Q&AAnswer
Jan 10, 2025 - 09:11 PM
To pair the Adesso XTREAM-H3 Wireless Bluetooth Headphones with your device, please follow these steps:
1. Make sure the headphones are in the off state. Check the power LED, there should be no LED on.
2. Press and hold the multifunction button on the headphones for 7 seconds until the red and blue LED start flashing.
3. On your device, go to the Bluetooth settings menu. This is typically found in the "Connect" or "Setup" menu.
4. Enable Bluetooth on your device and start the pairing process. Your device will search for available Bluetooth devices.
5. When your device finds the XTREAM-H3 headphones, select it from the list of available devices.
6. If prompted, enter the pin 0000 and press "Yes" or "Confirm" to pair the headphones with your device.
7. If the pairing is successful, the blue LED on the headphones will flash 3 times.
Note: Make sure the headphones are fully charged before attempting to pair them with your device. If you are still experiencing issues with pairing, try disabling Bluetooth on your device, power off the headphones, then power them on again and enable Bluetooth on your device. The headphones should appear as XTREAM-H3 in the Bluetooth settings.
For more detailed instructions and troubleshooting tips, please refer to the Adesso XTREAM-H3 Wireless Bluetooth Headphone User Guide.
Add New Comment