User Manual Q&AAnswer
Jan 10, 2025 - 09:06 PM
To connect your InFocus LP70+ Mobile DLP Video Projector to a computer, follow these steps:
1. Make sure your computer and the projector are turned off.
2. Locate the VGA cable that came with the projector. One end of the cable has a blue connector, and the other end has a 15-pin connector.
3. Connect the blue connector of the VGA cable to the VGA output port on your computer.
4. Connect the 15-pin connector of the VGA cable to the VGA input port on the projector.
5. Turn on your computer and the projector.
6. On your computer, go to the display settings. This can usually be done by right-clicking on the desktop and selecting "Display settings" or "Screen resolution."
7. In the display settings, select the option to extend or duplicate the display to the projector. This may vary depending on your computer's operating system.
8. Adjust the focus and zoom on the projector to ensure a clear and properly sized image.
For more detailed instructions and troubleshooting tips, please refer to the user's guide provided with the InFocus LP70+ Mobile DLP Video Projector.
Add New Comment