User Manual Q&AAnswer
Jan 10, 2025 - 09:05 PM
To connect your Optoma EH412ST DLP Projector to your computer, follow these steps:
1. Make sure your computer and projector are both powered off.
2. Locate the HDMI or VGA port on your computer. The Optoma EH412ST DLP Projector supports both HDMI and VGA connections.
3. Connect one end of the HDMI or VGA cable to the corresponding port on your computer.
4. Locate the HDMI or VGA input port on the back of the projector.
5. Connect the other end of the HDMI or VGA cable to the input port on the projector.
6. Power on your computer and projector.
7. On your computer, go to the display settings and select the appropriate display mode for the projector. This may vary depending on your operating system.
8. Adjust the projector's focus and keystone correction, if necessary, to ensure a clear and properly aligned image.
For more detailed instructions and troubleshooting tips, please refer to the user manual of the Optoma EH412ST DLP Projector. You can find the user manual at the following link: [Optoma EH412ST DLP Projector User Manual](https://manuals.plus/wp-content/uploa...)
Add New Comment