User Manual Q&AAnswer
Jan 10, 2025 - 08:46 PM
To enable and use the Auto Keystone feature on the ViewSonic PX748-4K projector, please follow these steps:
1. Power on the projector and wait for it to fully start up.
2. Press the "Menu" button on the remote control or the control panel of the projector to access the main menu.
3. Use the arrow keys on the remote control or the control panel to navigate to the "Image" or "Settings" menu.
4. Select the "Keystone" or "Keystone Correction" option from the menu.
5. In the Keystone menu, you should see an option for "Auto Keystone" or "Auto Keystone Correction". Select this option.
6. Once the Auto Keystone feature is enabled, the projector will automatically adjust the keystone to correct any distortion and align the projected image properly.
7. If necessary, you can also adjust the vertical keystone manually using the arrow keys or navigation buttons to fine-tune the image alignment.
Please note that the Auto Keystone feature may not be available in all projection modes or under certain settings. Make sure you are using a compatible projection mode and adjust any other relevant settings, such as aspect ratio or screen size, for optimal results.
For more detailed instructions and information, please refer to the user guide or manual provided with the ViewSonic PX748-4K projector.
Add New Comment