How do I mount the GE 73777 5-Outlet Surge Protector? (GE 73777 5-Outlet Surge Protector User Manual)

Answer

manuals.plus

Jan 10, 2025 - 08:37 AM


To mount the GE 73777 5-Outlet Surge Protector, follow these steps:

1. Locate a suitable mounting surface: Choose a flat, stable surface near a power source. Ensure that the surface is clean and dry.

2. Position the surge protector: Place the surge protector on the mounting surface in the desired orientation. Make sure the outlets and USB ports are easily accessible.

3. Mark the mounting holes: Use a pencil or marker to mark the locations of the mounting holes on the surface. The surge protector has two mounting holes located on the back.

4. Drill pilot holes (if necessary): If the mounting surface is made of a hard material such as wood or drywall, you may need to drill pilot holes at the marked locations. Use an appropriate drill bit size for the mounting screws.

5. Attach the surge protector: Align the mounting holes on the surge protector with the pilot holes or marked locations on the surface. Insert the mounting screws (not included) through the surge protector and into the pilot holes.

6. Secure the surge protector: Tighten the mounting screws until the surge protector is securely attached to the mounting surface. Ensure that it is level and stable.

7. Connect devices: Once the surge protector is mounted, you can plug in your electronic devices into the available outlets and USB ports.

Note: Make sure to follow the precautions mentioned in the user manual and consult a professional if you are unsure about the mounting process or if you need assistance.