User Manual Q&AAnswer
Jan 10, 2025 - 05:32 AM
To pair the Volt Plus Tech F9 Wireless Bluetooth Earbuds with your device, follow these steps:
1. Turn on Bluetooth on your mobile device.
2. Remove the earphones from the charging case. They will turn on automatically, indicated by a blue light.
3. The earbuds will enter pairing mode. Look for "F9" in the list of available Bluetooth devices on your mobile device.
4. Select "F9" to connect the earbuds to your device.
5. Once connected, the earbuds will say "Connected" to confirm the pairing.
Note: If you are experiencing issues with pairing or if only one earbud is working at a time, you can try re-syncing the earbuds. Here's how:
1. Hold the left earbud in your left hand and the right earbud in your right hand for easy identification.
2. Press and hold the buttons on both earbuds simultaneously for 10 seconds.
3. After 10 seconds, the LED on the earbuds will flash solely blue. Release the earbuds.
4. Quickly tap the right earbud twice. The LED will continue to flash red/blue until one of the earbuds turns off. This is normal as the other earbud will continue to flash red/blue.
5. Go to the Bluetooth settings on your device. "F9" or "Headset" should appear just once instead of twice. If "F9" or "Headset" appears independently once again, repeat steps 2 and 3 as it may take a few tries for the devices to fully re-sync.
6. Once the earbuds are re-synced, they should work together as a pair.
For more detailed instructions and troubleshooting tips, please refer to the user manual provided with the product.
Add New Comment