User Manual Q&AAnswer
Jan 10, 2025 - 04:41 AM
To pair your Bluedio H2 Bluetooth headphones with your device, please follow these steps:
1. Make sure your headphones are fully charged.
2. Turn on your Bluetooth headphones by pressing and holding the power button until you see the indicator light flashing.
3. On your device, go to the Bluetooth settings. This can usually be found in the Settings menu.
4. Turn on Bluetooth on your device if it is not already enabled.
5. In the Bluetooth settings, search for available devices. Your Bluedio H2 headphones should appear in the list of available devices.
6. Tap on the Bluedio H2 headphones in the list to initiate the pairing process.
7. A prompt may appear on your device asking for a passcode or PIN. Enter the default passcode "0000" or "8888" if prompted. If not prompted, skip this step.
8. Once the pairing is successful, the indicator light on your headphones will stop flashing and remain solid.
9. Your Bluedio H2 headphones are now paired with your device. You can now enjoy wireless audio playback.
Note: If you have previously paired your headphones with another device, make sure to disconnect or unpair them from that device before attempting to pair them with a new device.
For more detailed instructions and troubleshooting tips, please refer to the user guide that came with your Bluedio H2 Bluetooth headphones.
Add New Comment