User Manual Q&AAnswer
Jan 10, 2025 - 03:39 AM
To connect your Yamaha R-N602 Network Hi-Fi Receiver to your WiFi network using MusicCast, follow these steps:
1. Make sure your WiFi router is turned on and functioning properly.
2. On the front panel of the receiver, press the "NET" button to select the network input source.
3. Use the remote control to navigate to the "Setup" menu by pressing the "MENU" button.
4. In the "Setup" menu, select "Network" and press the "ENTER" button.
5. Select "Network Setup" and press the "ENTER" button.
6. In the "Network Setup" menu, select "Wireless Setup" and press the "ENTER" button.
7. The receiver will start searching for available WiFi networks. Wait for the list of networks to appear on the screen.
8. Use the arrow buttons on the remote control to select your WiFi network from the list, and then press the "ENTER" button.
9. If your WiFi network is secured with a password, a virtual keyboard will appear on the screen. Use the arrow buttons and the "ENTER" button to enter your WiFi password. Press the "ENTER" button again to confirm.
10. After entering the password, the receiver will attempt to connect to your WiFi network. Wait for the connection to be established.
11. Once the connection is successful, the receiver will display a confirmation message on the screen.
12. Press the "RETURN" button on the remote control to exit the setup menu.
Your Yamaha R-N602 Network Hi-Fi Receiver is now connected to your WiFi network using MusicCast. You can now enjoy wireless streaming and control of your music through the MusicCast app or other compatible devices. For more detailed instructions and troubleshooting tips, please refer to the user manual provided.
Add New Comment