User Manual Q&AAnswer
Jan 10, 2025 - 03:21 AM
To adjust the screen size and position on the Pyle PRJLE67 Portable Home Theater Video Projector, follow these steps:
1. Start by turning on the projector and displaying the start menu.
2. Use the navigation keys on the remote control or the buttons on the projector to navigate to the "Settings" or "Setup" menu.
3. Look for options related to screen size, position, or keystone correction. These options may be labeled differently depending on the projector's firmware version.
4. Select the screen size option and use the navigation keys to increase or decrease the size of the projected image until it fits your desired viewing area.
5. If the image is not centered, look for the screen position or keystone correction options. Use these options to adjust the horizontal and vertical position of the image until it is centered on the screen.
6. Once you have made the necessary adjustments, save the settings and exit the menu.
7. Test the projector by projecting an image and check if the screen size and position are now adjusted to your liking.
For more detailed instructions and illustrations, please refer to the user manual of the Pyle PRJLE67 Portable Home Theater Video Projector. You can download the manual from the following link: [PDF User Manual](https://manuals.plus/wp-content/uploa...)
Note: The specific menu options and navigation may vary slightly depending on the firmware version of your projector.
Add New Comment