User Manual Q&AAnswer
Jan 10, 2025 - 02:42 AM
To assemble the George Foreman GGR50B Electric Grill, follow these steps:
1. Wash the grill base, grill, grease tray, and lid in warm, soapy water. Rinse and dry thoroughly.
2. Assemble the pedestal tube by connecting the two halves of the tube. Press the two pins on the end of the upper pedestal tube and slide it into the un-slotted end of the lower pedestal tube. Rotate until the pins firmly engage the holes in the lower pedestal tube.
3. Place the pedestal base on a flat, level surface.
4. Insert the slotted end of the assembled pedestal tube into the center hole of the pedestal base and push down firmly.
5. Place the grill base on top of the pedestal tube assembly, ensuring that the hole in the center of the grill base engages with the tube.
6. Place the grease tray securely into position inside the grill base. It should be held firmly with the pointed end in the center of the grill base.
7. Position the grill securely on the grill base.
8. Position the probe receptacle through the probe cutout in the top side of the grill base.
9. Attach the lid handle to the lid from the inside using the rubber-ringed fastener.
10. Place the lid over the grill, and your grill is now ready to use!
For more detailed instructions and illustrations, please refer to the George Foreman GGR50B Electric Grill Instruction Manual.
Add New Comment