User Manual Q&AAnswer
Jan 10, 2025 - 02:12 AM
To connect the PYLE PDWM1988B Compact UHF Wireless Microphone System to a speaker or amplifier, you will need a 1/4" audio cable. Follow these steps:
1. Locate the 1/4" audio output socket on the receiver. It is labeled as "1/4 Audio Output Socket."
2. Connect one end of the 1/4" audio cable to the 1/4" audio output socket on the receiver.
3. Locate the input socket on your speaker or amplifier. This may vary depending on your specific speaker or amplifier model.
4. Connect the other end of the 1/4" audio cable to the input socket on your speaker or amplifier.
5. Make sure your speaker or amplifier is turned on and set to the appropriate input source.
6. Turn on the PYLE PDWM1988B Compact UHF Wireless Microphone System by switching on the receiver's power switch.
7. Adjust the volume settings on both the receiver and your speaker or amplifier to achieve the desired sound level.
Note: It is important to ensure that the receiver and the speaker or amplifier are compatible in terms of audio input/output connections.
Add New Comment